Tub--Kohler Archer or Americast Cambridge
writersblock (9b/10a)
12 years ago
Featured Answer
Comments (9)
qt314b
12 years agowritersblock (9b/10a)
12 years agoRelated Discussions
DIY budget elegant bathroom, almost done: pics...
Comments (95)I'm very sorry I did not answer the questions from the last few years... I've been out of reno mode for a while :) It's probably too late, but here are the replies: @walkin_yesindeed - the vanity finish has held up just fine. However, it's not the original paint. We sanded and re-painted with new Ben Moore bathroom paint. No issues with dampness (we do run the fan for every shower, though.) @kirkhall - I have NOT been happy with the touted un-stainable-ness of the epoxy grout on the floor. I mean, it's better than regular grout, but it didn't stay white no matter how much I cleaned it. It looks fine, since the tile is multi-toned, but it's definitely not still white. The shower grout, however, has held up extremely well. @SparklingWater - I don't recall the demo being terribly difficult, but that may be because I knew what to expect from other parts of the house. It was tile over a dense cement. @MrsD - I think the grout color is standard white. @MayaEoff - Our tub is the standard 30" size....See MoreAmerican Standard Tub and Sink?
Comments (8)Yea, I better stick with original plan. There are too many issues with American Standard quality and the nature of the Americast tubs, which are really like Bootzcast tubs but with a resin backing that gives it more support. And there are reports of the resin even cracking on the bottom especially where people stand when taking a shower. But darn, that Cambridge tub sure was comfy for me. So I will go back to the Kohler Tresham Vanity top sink to match a white acrylic tub. I also like the drop in Tresham which you showed above and of course I like the Memoirs drop in sinks. The Tresham vanity sink version is like a countertop sink. It will give me some height without having to build up the existing vanity. like the looks of Kohler Devonshire tub but it has a depth of 14 inches - I could always install a Kohler deep soak tub overflow drain. Or choose the Mirabelle Bradenton which has a depth of 16.5 inches. My inspiration for this remodel is a bath I found on Houzz. It has a Kohler Archer alcove tub. I will be extending the shower out and Hydro Ban has a 36 wide x 48 deep premade shower pan with a 36 curb (per Mongoct's recommendation). I called Laticrete and they emailed me the spec page. The crazy tract home supply plumbing has 2 cold and 1 hot pipes coming up on the corner of the big garden tub. I don't want to move all of the plumbing so I will build a ledge for it and install the Roman faucet on top. Right now, the garden tub is installed right up to the vanity. I am going to install a 32 inch wide alcove tub to give more floor space and a sliver of wall space to keep the bathroom from looking too boxed in. I will fill in the drop down under the current tub to make the floor level and the bottom of the tub even with the floor to make it safer to get in and out of the tub. That's the plan. Here is a link that might be useful: Houzz This post was edited by Anna_in_TX on Sun, Mar 23, 14 at 17:30...See MoreNo showrooms for bathtubs and can't decide.
Comments (11)I was deciding between the Kohler Archer (60x32x18), Hydrosystems Lacey (60x36x20 (comes in a variety of widths, including narrower)), an MTI tub similar to the Hydrosystems (Andrea, I think), and the Mirabelle Edenton (60x30x20). I ended up going with the Mirabelle because it was the largest interior dimensions of all of the tubs. I drove to three different places (two Fergusons and one other showroom) to sit in them each. The Mirabelle ($1850 with drain) was slightly more expensive than the Kohler ($1450 with drain), but the acrylic didn't feel as cheap to me. The Hydrosystems was the most comfortable to me in terms of the backrest, but it was shorter (I'm 5'11") than the Kohler and Mirabelle and expensive ($2900). Although the Kohler is 32" wide and the Edenton I bought is only 30" wide, the Edenton feels (and is) larger inside because there's no armrests eating up space. You really need to sit in each. The other benefit to the Mirabelle (or Hydrosystems or MTI) is if it's an alcove installation, the Kohler skirt is unattractive. So long as you can fit an access panel behind one of the walls, the Mirabelle (and Hydrosystems and MTI) offers a modern skirt (and Hydrosystems and MTI even provide you with the option of adding the skirt and tile flanges on other sides). The Kohler is a lower tub but the drain allows you to fill it more, but that feature doesn't seem that important if you can fit a 20" high tub like the Mirabelle. (Mirabelle is only sold at Ferguson, by the way, so you get some of the features of the more expensive tubs at a lower price point because it's their own brand.) I posted pictures of my remodel if you want to see the tub I used. http://ths.gardenweb.com/forums/load/bath/msg0409041521118.html?12 If I had bought the Hydrosystems, I would have had the company put a skirt on two sides, a tile flange on two sides, and installed the pump remotely in the linen closet (most air baths allow you the option to install the pump several feet away, and sometimes as far as 15 feet, which at least to some extent eliminates the need for an access panel). That customization is included within the price I quoted above ($2900). The tub may be cheaper in an alcove application....See MoreAnyone happy with their Americast Cambridge tub? Anyone?
Comments (15)I considered AS even tho I know they have a terrible reputation for quality and customer service. I was thisclose to ordering the Cambridge till my husband looked at it (it was for his bathroom) and said absolutely not. He didn't like the idea of a "plastic" tub and didn't like the looks. I think it was too short. We went with the Kholer cast iron Bellwether. I hate the 14" height. (To me) it doesn't match the high end materials and look of the bathroom. He likes it (or won't admit to not liking it) <lol> My tub is 19" tall. I'm 5' tall. I don't find it a problem. He doesn't like one that tall. I was hoping to compromise and find a 16" to 17" tub for him. That wouldn't have been a problem except he wanted a 30" wide tub. That really limited the cast iron heights....See Morewritersblock (9b/10a)
12 years agopalimpsest
12 years agowritersblock (9b/10a)
12 years agowritersblock (9b/10a)
12 years agoaniawin
9 years agowritersblock (9b/10a)
9 years ago
qt314b