I did a search for printable mouse pads and the sites that came up said to use tee-shirt printable transfer paper. Then you iron it on. I used that kind of paper for tee-shirts years ago and the pictures stayed on through many, many, many washings. Hope this helps, I used Kodak brand transfer paper from Staples.

Doing a power cycle should sort that. 1) Make sure the touch pad is enabled (still not working? Go to step 2) 2) Turn off the computer 3) Unplug the power cord from outlet or laptop 4) Remove the battery 5) Press and hold the power ON button for 30 seconds 6) Re-insert battery 7) Plug in power cord 8) Turn on the computer After doing the above is it working? Paddy..

This message was sent to me by Barbie: Stamps that do not stamp clearly by barbieboop Why? Could be for a few reasons.. Try pressing harder Large stamps work best if you stand up and press them Stamp large images over a mouse pad or fun foam sheet Stamp lg stamps image side up and use a brayer to press the image onto the card. Some stamps get warped. The foam between the wood and the image gets smooshed. So, you can use a mouse pad to stamp on or remount them. Change the foam. New stamps and bold images sometimes need to be stamped a few times to get a good image. Allowing the ink to stain the rubber. Some images need to be lightly roughed up with fine sand paper. Some images have Âedges that stamp along with the image. Trim this portion off with an exacto knife or with sharp scissors.. If you can. Or. You may have to pull some images off the wood and trim the Âedges off then remount that image. Hand carved images stamp best the more times they are used. Or heavily inked. hugs, barbie

Ditto to the kit- I made one about 5 years ago and just the other day tossed it out because I think I had worn it shiny. It's an iron on kit, you print out what you want in reverse and then iron it on. Worked great.