This is long, but important, so please read all the way through. My personal theory as to WHY the dirt in these pads do not like to come clean in the first place is because they are all made out of synthetic microfiber blends. This is NOT a rant about doing everything in your life all-natural so please stay with me. In the beginning of my Cosmetology education, I learned that synthetic fibers (such as those used on wigs and cosmetology tools and brushes, do Not like hot water. Only cold or at least tepid water could be used unless you enjoy having your brushes, cloths and wig hairs get all tangled and matted up in an instant, melted in some cases, or hairs/fibers fused together. It’s synthetic. It can’t take the heat. With that said, I suspect these companies insisting on using microfiber steam mop pads are setting us all up for failure from the beginning. Steam is insanely hot and WILL melt and fuse the little fibers together during use (this is why they say not to put them in the dryer). Steam blows open the fibers in an intense way which is something else I learned in Cosmo school. Steam always works better than hot water in opening up skin pores for instance. Material fibers are no different… unless that material blows up but then breaks down with said heat. Polyester and Nylon just can’t take the heat. You might ask why the heck these companies would make their pads with microfiber if that were true. I’m glad you asked - I suspect the mop companies use these materials anyway, because it’s much cheaper than cotton and will slide nicely across the floor. They know if their customers feel they have to push too hard, they won’t want to use it and will go with the other company that does use microfiber. Let’s be honest, “microfiber” is like some positive buzz word in the retail industry when actually many of us avoid it like Covid. It only has a few good qualities, none of which are involved with mop heads. Microfiber, is good only for scrubbing, acting as a water repellent in some cases, and behaving somewhat like Velcro when used for dry sweeping. Have you ever tried to remove things that stuck to microfiber material after being in the wash or dryer? It’s not fun is it? When microfiber is used in wet cleaning applications however, that synthetic material DOES NOT ABSORB. It just doesn’t. It’s synthetic. Synthetics don’t absorb like a natural fiber (e.g. Cotton) does. Try wiping dry your kitchen countertop with a microfiber wash cloth, and then try again with an all cotton and you will see what it is I’m saying. All of this to share that I finally found a solution to not only keep my microfiber pads from getting too dirty (or worse than they already are), but to also pick up dirt far better than what the pads were originally doing (I have one of the Bissell Power Fresh Pet steam mops for reference). SOLUTION: I take a damp, wrung out steam mop pad, flip it inside out (I also cut off the scent disk pocket), place it on my steam mop, then place the mop down on top of a 100% cotton shop towel and click down the flip scrubber piece in the back of my mop so that it grabs my towel. At this point, I use the mop as usual on the highest steam output setting. Why do I flip the mop pad inside out? Because I discovered that it allows the towel underneath to stay put a little better and glides across the floor better as well. I have also only ever done this with a damp, completely wrung out mop pad in place, but with a dry shop towel. After the towel gets dirty, I rinse out the mop pad and wring it out again as much as possible before placing back on my mop and grabbing another clean, dry shop towel. The benefit here, is not only are my floors getting that much more clean, but I can buy cotton shop towels by the mass for much cheaper than those mop pads AND they clean up white so much easier! If you want to bleach, then bleach. If you want to use your usual make-em-white method, then do that instead. The world is your oyster. Cheaper Works better Cleans up Whiter Easy It’s what has finally worked for me and my mop. I hope it helps some of you too.

They are both good, but you may like the bissel better. I have the shark mop, had the first one they made and I loved it..they made a new and 'improved' one, and even though it is a good mop, powerful, and lots of steam, you have to push the mop forward for the steam to be released. They designed it this way as a saftey precaution. It's a personal choice in how the mops function, both are good mops. I personally like continuous steam.. probably because that is what I have been use to for a few years...that is my disappointment with shark. Either way, steam is a great, easy, fast way to clean, does a great job. Ree

There are many large posts here about the benefits of each of the products you mentioned. If you do a search, you find lots of good info and reviews from people who use them everyday. I will say, however, that there don't seem to be many people who use the shark/euro-pro canister steam mop. That is what I have. I got it from Lowe's for $99. It is NOT the same type of appliance as the bissell or the shark mop. Those are "stick" type mops. The shark canister looks like a small canister vacuum. It holds enough water to steam for about 45 minutes. I also have a new large home and lots of tile. I would recommend that you make sure that your grout is sealed properly. That will ease alot of worries. I have several large areas of tile, and I can mop pretty much everything without having to refill (and wait 15 minutes for it to heat up). So basically, I'd say I can mop everything in much less than an hour. It's ALOT less strenuous than conventional mopping. It doesn't use chemicals, either. I never noticed how much that smell bothered me until I quit using lots of cleaning chemicals! It seems to do a VERY good job cleaning the tile. Of course, you still have to sweep first, but I just use a large dust mop and that doesn't take but just a few minutes. The shark also has attachments that are good for cleaning the crevices around toilet seats, corners, etc. There's ALOT of things you can use it for. I haven't had much luck with mirrors, for some reason, though. The only downfall I have with my steam mop is that it only comes with one microfiber pocket (you can flip it over and use both sides). But I use 2-3 when I clean my whole house. I had to order an extra pack from the company and it took 12 weeks to come in. You will DEFINATELY need a couple of packs to do your house. Hope that answers your questions. Good luck.

I used the Bona spray bottle with microfiber cloth stuck to the bottom of the stick thing that comes with it for a couple of years and thought it was doing a somewhat decent job and would also every once in awhile clean it on my hands and knees with a damp cloth yet I always wondered why the heck it felt somewhat sticky and also if you walked on it barefoot and your feet had any condensation on them whatsoever it would leave trails everywhere in the house you walked. After having a child it made me think twice about spraying a chemical down on the floor they were crawling on and then them putting their hands in their mouth and whatnot, which led me to try the shark steam mop which I saw on a late night infomercial and while it did work somewhat it took forever and you had to constantly pump it to get steam and therefore it was easy to use excessive steam when it finally started coming out and then leaving drips everywhere and puddles even. After a few months ths flimsy shark broke from me trying to push down on it hard to get out a spot of something on the floor basically because it doesn't heat up hot enough to even clean that up. Finally I dug around on Amazon and stumbled onto the Eureka Steam Mop, this thing is awesome. It feels like I am cheating when I am cleaning it takes so little time, it heats up much hotter than the shark so therefore it sterilizes the floor and easily cleans of any mess with no effort and from time to time I have to check that it is actually working because the water evaporates so quick you can't even see it ever sitting on the wood except for a few seconds. This Eureka steam mop is very hard to get ahold of usually because it is out of stock quite a bit and the only downside I have seen is that the replacement pads are hard to find and get ahold of. I ordered some direct off of the companies website and they didn't ship forever so I called them up and they said they cannot keep them in stock ever because everytime they are in stock they all get bought up in no time and she said everything related to this Eureka steam mop does because it is a huge seller for them. I totally understand why...haha My cleaning lady was shocked how good this unit was and has actually had all of her clients buy them now too and they have all had the same exact results I did. So I guess if your happy working your butt off keeping your floor clean the old school way and spaying chemicals and breathing those in then keep doing it, yet if you want actual clean floors not getting build up on them and to clean your floors in a quarter of the time with this unit and some distilled water then go for that as well. Just search on Amazon for Eureka 313A if you would like to check it out and see the 640 reviews on it from actual customers yourself or click the link I attached, free shipping and no tax. Spoken like a true Amazon junky....lol Michael Here is a link that might be useful: Linky ==> Best Floor Cleaner I Have...