Just curious...how'd you come up with 31 sqft for tiling to the ceiling? For a typical tub surround: -poly sheeting: $10 -Half-inch thick Tile backer board, 4 sheets: $60 -Roll of mesh alkali-resistant tape: $7.50 -Tile: Name your price. Say $5 a foot for grins, for 60sqft it's $300. -One bag highly modified thinset $30 -One bag Grout $15 -Caulk $15 So materials, rounding way up, about $150 not counting the tile. Tools? -Stapler to staple up the poly sheet to the studs. -Utility knife and blades: You can score and cut the tile backer board like Hardiebacker with a utility knife. You can even cut holes with a utility knife, score the perimeter with the knife and pop out the center with a hammer. -Stapler to staple up the poly sheet to the studs. Hammer/nails: to nail up the backer board. You could use screws, but you'd need a drill with driver bit. To cut the tile: The box stores will do it for you on a per cut basis. I have no idea what they charge. For for basic tile you can use a score and snap cutter. They can be had for $25-$50. Or you can buy a cheap wetsaw at the box stores for $50. Or buy one on craigslist then resell it when you are done. So...$50 let;s say. Always good to have tile nippers, $20. Have your plumbing fall on grout lines instead of in the middle of a tile and you can nip a hole instead of having to drill a hole. To mix and spread the thinset: -bucket -margin trowel: $7.50 Yup. To hand mix the thinset and grout. The thinset, mix maybe a third of a bag at a time. Pace yourself. Or you can buy a paddle if you have a low-speed drill that has the torque to spin it. -notched trowel: $5, 1/4" x 1/4" to spread the thinset. To Grout: -Grout float: $10 -Grout Sponges: 2- or 3-multi-pack for $5 Basic hand tools, about $50. Add $50 for a tile cutter, so total tools is about $100. Materials: $150 Tile: $300 @ $5 a ft Tools: $100 Total, about $550 Rough guess.

Hi Philo You won't need a new subfloor but you may have to skim the existing sheet vinyl to keep the old pattern from telegraphing thru to the new flooring. My Favorites - -REAL linoleum (just like the stuff from the old days - not vinyl) http://www.armstrong.com/resflram/na/linoleum/en/us/ -Cork Tile. Beautiful, extremely durable and super comfortable. A renewable resource too. http://www.corkfloor.com/pics.html http://www.corkdirect.com/ The Lino can be sheet or tile and is best installed by a pro. The cork is a good DIY project. MIKE

I use a photo editing program (MS Digital Imaging Suite, which is discontinued :( I capture images from the net with ScreenPrint Platinum and then cut and paste materials into the photo. It's pretty much cut & paste, although I have taken to a lot of the other tools to work with color and blending, etc. Someone recently posted a free photo editing program ... You can either superimpose (paste) or also cut the stone out of your original picture and place the new material behind in the blank space, which might be an easy way for you to go. Usually the net images are too bright, so tone down the color a bit using the saturation and lightness/darkness features in the coloring tools. Feathering the edges with the blur tool is another good tip. I would say it seems you have enough detail with the grill and mantel, so it's hard to imagine putting pebbles in, which does seem off in style as well with the mantel. Not that we need any rules :) I do think they look very pretty together with a simple, plain surround, though. I only tried the soapstone, low contrast, which I find keeps it very simple to let the details of the mantel and grill shine. Everything shouldn't be calling for attention or it will get too busy and confusing to look at. I'm sure you know what I mean :) Such beautiful pieces!

It cannot be used over Greenboard as the surface of the Greenboard has a treatment on it to make it moisture resistant which effects the Kerdi adhering. Also as an aside the drywall manufacturers specifically state no drywall in a shower so there is zero substrate warranty. Ask Schluter how they will warranty their system over a substrate that the substrate manufacturer says does not meet their approved application.