This old thread got revisited. @dani_m08 to answer the question about extra probe, I believe I ordered an extra one when I bought the set up. The probe wire is just setting in the junction box I think but honestly I cant remember. When I laid out the underfloor heating and the probe, I just ran another probe near the first probe, and it was then sealed into the floor self leveling compound as per instructions. then the end was just threaded into the wall like the one that would be live, and not connected, but just laying there in the box. Regarding the tile layout. I just decided to run it this way, after getting instructions on the 90Degree way, IIRC. The herringbone that I love is from my childhood and the side walks in my neighborhood that all ran at 45Degree. so that to me is herringbone. I know you posted on @sochi thread about her amazing bathroom and a wall mounted faucet. I would totally do it if I had the right sink for it. In my case I had made my sink out of soapstone and an integrated backsplash. The pictures of this bathroom reveal are no longer available because of the use of photo bucket, when it was Gardenweb. I did not keep my account with photo bucket. I'll add some of the reveal pictures so you can see the sink and floor. Regarding the sink there is no ledge for water to drip from my hands when using the faucet. The water drips right into the sink. In my other bathroom with a deck mounted faucet I am always wiping up drips and it is a nuisance. I much prefer the setup for this sink. Below: I love the flush finish from the faucet to the bottom of the sink. nothing drips on a counter or edge of a sink. Below: looking in from the doorway. Below: Here I am finishing up the sink. the backsplash was epoxied on as a separate piece. The whole soapstone install in the room took next to nothing to buy as they were all small pieces that I epoxied together with a 3 part stone epoxy. Below: this is the counter at the tub, and is in 2 long pieces but I was able to epoxy them together at there edges to make a wide slab for the top. All the soapstone was finished with a 60 grit sandpaper to be rough and this lovely soft tone of blue/green/gray/white. I did not oil it so this color tone would remain light. Below: If I recall correctly @sochi helped me decide on this Hubberton Forge Mirror. I have 3 different metals in this room, but they are all a cool silver to black color. Below: the center of this tower shares space with the kitchen on the other side of the wall. there is also some extra space that houses some electrical wiring. this is an old simple house. this bathroom was an add on when it got move to the farm in the 30s IIRC. The plumbing was all rearrange and some of the details that were orignially there I kept but updated it, such as this tower feature. The old one went and the carpenter did a wonderful job with this one. Below: This feature was another thing I kept from the old bathroom but flipped it from the other end and had the carpenter put drawers in it. Before it was a hell hole. things got lost and the build was soooo old and creapy I didn't like using it for storage. Now it is perfect for storage.

Here is my list - - Additional blocking in the framing stage to accomodate grab bars, towel bars etc. Additional blocking being the slidebar of the shower also makes it sturdier to use as a grab bar. - Kerdi board for waterproofing - Heated wires throughout the floor including the shower area - Tall niches with shelves sized to fit the costco sized bottles - Tile that is not too slippery for the floor. Also used epoxy grout to make future maintenance easier. - frameless shower doors - we did pay a couple hundred dollars extra for the really clear glass - U-groove frameless - One of the bathrooms is curbless to accomodate access issues. Has nice looking grab bars and a folding teak shower seat that is ADA rated to 400lbs. - LED cans (california code) - Elongated Toto skirted toilets with sanigloss to make the cleaning easier - the special lutron switches where the fans stay on an extra 20 mins to clear all the steam. we used them with panasonic fans which are much much quieter than what we had in the past - wall mounted heated towel rods - hooks instead of towel bars.. I just preferred the more streamlined look of hooks - plug outlets inside the vanity to charge things. - wheeled laundry basket with divers to sort laundry has a niche to be tucked in. - separate toilet stall with a door. We did not do comfort height as we are not overly tall people. Elongated toto toilets with an integrated skirt to make cleaning easier and a GFCI outlet to plug in a washlet. - paper towel holder from Moen that doubles as a grab bar in the ADA bathroom. - accomodated for daylight (skylight or a window) in both the bathrooms to help people to wake up in the morning.. I love the daylight. - radio for listening in the morning. We are big public radio fans - wall mounted lighted makeup mirror - mirror defogger to prevent the mirror from getting steamed up.. - vac pan at the floor level that connects to our central vac system to make daily cleanups a breeze. I am picky about hair on the floor - solid core doors to prevent bathroom noises from being heard outside. I often have to get ready before dawn and the shower noise wakes DH up. - recirculating pump for our tankless to avoid warm water delays. Ours is integrated into the tankless. - Hansgrohe ibox to get the thermostatic control to preset the preferred temprature - Ebbe integrated drain that has a hidden hair snare. - Handheld shower with a longer hose to make it easier to clean the walls. - rain shower on a longer arm so that you can stand away from the wall.

BM Aura Matte in our guest bathroom (Bath and Spa came out right after we'd completed that room), and BM Aura Bath and Spa Matte finish in our hall bathroom and MB. Love the look--it's not shiny at all, but not dead flat either. Has almost a velvety look. We used BM Aura Satin finish on the base molding (Bath and Spa not available in Satin, at least not earlier last year, not is Aura available in Pearl finish, which has slightly less sheen than Satin from what I've been told). Paint color is the same as the wall color, but the molding looks nicer with a hint of sheen IMO.

The ballard shower curtain you describe would be gorgeous-- and elegant but so tailored and cold next to what you've described in your other rooms. I don't think the styles need to match necessarily but it sounds like a completely different personality to me-- as does the toile (though it would be lovely too). You've done some interesting and unexpected things in your other rooms-- it just seems natural that you'd do the same in the bathroom. I love black and light green together--if it were my bathroom, I'd use a leaf print to make a beautiful little oasis. You could go wild and tropical for one look.. or more subdued for a more serene environment. I tend towards the serene-- so I'd go for something like the PB overlapping leaves shower curtain with interesting artwork. But that's MY taste haha.. what "feels" right to YOU? It may be too "earthy" for your tastes but I have handcrafted tiles in my small half bath with a raised frog and turtle. But you could go so many directions with leaves-- black and white photographs like citymom did.. some kind of funky tribal or island decor. Whatever tickles your fancy. Here is a link that might be useful: one option for leafy green shower curtain