I'll have to be honest, as much as I want to believe in Aquatic after talking with their incredibly enthusiastic and helpful cust srvc rep,as well as the most impressive specs on the market, I visited a showroom yesterday to experience the real deal (Infinity VII) and found the dry test-drive a bit harsh on the bones, i.e., doesn't conform to body like I had hoped, a little too upright and not conforming to the reclining torso. That test drive, albeit a dry run, convinced me this was not the tub for me despite it looking ideal on paper. Granted I wasn't able to float in the tub with water, so this is slightly unfair to the mfr, but getting in and out of the deep vessel along with reclining in the tub without water was surprisingly uncomfortable, and bone-crunching. I'm a young man still, and felt like multiple grab-bars on the walls would be de rigeur. The only reason I post this is not to discourage you from buying Aquatic, but because shopping for a whirlpool/airbath combo has been one of the most difficult quests I've experienced in planning my bath addition, and on paper, this was the tub for me, in vitro, this was NOT the tub for me. Just keep in mind that you simply must seek out a showroom to sample any tub prior to making the huge investment - not just money for the tub, but permanent plumbing specific to that tub leaves little room for future change of heart! For this reason, I've been very careful in ensuring that I'd be completely happy with the fit, and felt it necessary to share my experience. This is a decision 3 years in the making due to lack of showrooms that simply don't offer the real test drive or tub variety that gives you an overall gestalt. Again, Aquatic might be for you, but test drive it, or your regrets will eat you up. Other tubs I've crossed off the list, right or wrong, were Bain Ultra cause I simply wanted the combo, however, they seem to have an unbeatable reputation in the strictly air-bath category. Sani-jet, I actually experienced with water, and the jets were simply too weak for me, but again all their specs looked good on paper. Neptune, I experienced in a hotel, and was extremely impressed, but when it came to owning one, the contour again wasn't something I'd want to recline in for an hour, and none of this years styles/profiles appeal to me. Americh, don't know. Maax.....two trades people gave me bad reviews saying they make the most comfortable, stylish tubs with the necessary whistles and bells, but technical issues required discontinuing their carrying the line....surprising, as Home Depot Expo was pushing this on me like you know what. What am I going with, well I did a dry test run on the Jason LX635 (6 foot) which meets my comfort criteria without water, looks great on paper, has been in the business for as long as Jacuzzi has been in business (Jason=son of Jacuzzi), and was carried by a local trusty high end fixture place with exceptional reputation and attentive to customer feedback. Again, I'm taking a risk without doing a 'wet' run, and their head pillow was so poorly placed, that I dissed the option, but overall, it met most of my criteria. Will keep you posted after install, etc. The most comfortable tub I've experienced was the Maax oval-shaped whirlpool-air combo (Pearl?), but again, I talked to two vendors who said they had issues with them which is highly unfortunate since comfort-wise and on paper it was the perfect tub, like sitting in a LazyBoy, but with water massage. I hope to seek something comparable in the Jason.

seattlemamadrama ~Well my Wasauna story ended badly. The first tub was drained the wrong way for me. I shipped it back at their expense and received my replacement last week. The crate was in horrible condition, held together by plastic wrap about 2 times around it. The person who sent it to me must have received my tub and we just traded. I sent him one in perfect condition never removed from the crate. The tub he sent me was dirty, removed from the crate and damaged with scratches. I refused the delivery and call Alex for a refund. He tried to give me 300.00 off and get a new one sent to me but I just took my refund. I have not seen the credit on my card as yet, it has been 4 days. I would say stay away from them. I am in the process of looking for something else now. Good luck to you! Mariofo

For a jetted tub used as a shower, it has to have an integral tile flange. That allows the wall cladding to overhang and any water that hits the wall to not go behind your walls. There aren't that many in that size that are inexpensive. It will need a specialized drain, and, if you want to spend any time in the tub, a supplemental heater so the water doesn't cool off so fast. Since it's a tub/shower, the wall cladding will need to be redone to be waterproof into the tub. It's possible, if the build is recent, and it was done with the proper vapor barrier behind it, that only one row of the tile would need to be pulled in order to replace the tub. But, I wouldn't count on that. I'd count on having to replace all of the wall cladding in the alcove. That can be as cheap as a plastic surround for around $100 or cheap tile with the proper vapor barrier for probably $150 or so. The first is the easiest and the least chance of leaking. The second will read as more upscale, but you have to be sure your contractor understands about the vapor barrier and correct materials to use to tile this (NOT mastic.) And since you have that torn out, it would be foolish to try to keep your current control valves for the bath unless they are also very new. New safety standards are in place for anti scald mechanisms. So, you will need a new shower/bath faucet and valve. Then you will need the electrical line run from the panel to the location for the whirlpool pump and supplemental heater. That location is usually opposite the drain side of the tub. You will need to be able to site an access panel that is removable to be able to get to the electrical innards here. That can be from an adjacent room, or from a hidden panel on the tub itself. All in all, you might be able to get all of the needed materials for 2-3K if you shop the box stores carefully and find some bargains. The danger to that is that if you are inexperienced, you don't know if you're buying quality or crap. They sell both. And that's one reason that it would be simpler to let the pro pick the products after you tell him the features that you want. Then you've got to pay the contractor labor to install all of that. The electrician's price will depend on how difficult it will be to access the panel and run the wire to the location. For that, it's a really good thing you are on a crawlspace! That makes it cheaper for both the electrician and the plumber. On the whole, I'd expect your project to cost between 5-7K, depending on location, and if you have no DIY skills to bring to the table and have to hire professionals for the whole job. And be sure that you hire someone that is licensed and insured to be in your home, and will pull the proper permits to get the job inspected with your code office. Some handyman guy isn't licensed to do electrical of that nature, and while he might be able to do the demo and get the tub in place and glue on the plastic surround, it's unlikely that he'll have the right insurance to deal with a large job like that, and thus probably wont' want to pull permits and be inspected. They are usually limited to smaller jobs like simple fixture replacements like a faucet or light. Which this isn't. Just remember, you are doing a project that combines electricity and water. You really have to know what you're doing here! A small General Contractor should be able to do the complete job, and also carry the needed papers. And he should have no problem with the code guys coming in to inspect his work either. If he does, then he's not the right person for the job.

You can check out Neptune tubs. Neptune Tubs They have a large variety of tubs. You can combine water and air jets, have back heat, even lights. They seem to have a good reputation. We put in a Neptune Wind with air jets and back heat a few months ago and it works well. I have e-mailed them to ask questions and they got back to me with decent answers in short time.