I got this e-mail, too. I bought some Listerine, but haven't tried it. The bottle I bought is not the original kind, so I hope the "flavored" will work. I need to get a spray bottle and load it up. Becky

Oh--you asked for recipes. Here are two from Lorna Sass, either of which would justify the purchase of a PC: Curry in a Hurry This recipe from Lorna Sass’s Pressure Perfect is a quick and easy way to make a pretty tasty curry. You can make it with chicken, beef, lamb or pork, and vary the hotness by using mild or hot curry paste. 2 tablespoons of mild curry paste makes a pleasant-but-wimpy curry; 4 tablespoons of mild paste makes it pleasantly zingy; 4 tablespoons of hot curry paste makes it very hot, near my limit of tolerance (and I really like hot food). I generally use 2 tablespoons of hot and 2 tablespoons of mild curry paste. This is another recipe that’s ridiculously easy yet produces delicious food. If you don’t want to mess with the yogurt, peas and cilantro, don’t bother—the dish will still be very tasty, but the sauce won’t be as rich or velvety-smooth. ( I personally don’t like cilantro, so I don’t use it.) The recipe calls for 3 pounds of bone-in chicken; I find it easier to use about 2 or 2.5 pounds of boneless skinless chicken thighs. –Once you get the pressure cooker up to pressure, make a pot of rice. By the time the rice is done, so is this. 1 cup water 4 tablespoons Patak’s Mild Curry Paste 1 medium onion, coarsely chopped 3 pounds bone-in skinless chicken thighs or breasts, or 2-2.5 lbs boneless skinless thighs, or 2 lbs. other meat (see chart below) 1 cup plain yogurt 1 ½ cup frozen peas 3 tablespoons cilantro, chopped (optional) Pour the water into a 4-qt or larger pressure cooker and blend in the curry paste. Place on high heat and add the onion and meat of your choice. Lock the lid in place. Over high heat bring up to high pressure. Reduce the heat just enough to maintain high pressure and cook for the time indicated in the chart. Turn off the heat. Allow the pressure to come down naturally. (If cooking chicken, release any remaining pressure after 4 minutes.) Remove the lid, tilting it away from you to allow steam to escape. If the chicken or meat isn’t tender, cover again and simmer until done. If necessary, skim off the fat that rises to the surface or degrease the broth in a fat separator. Blend the yogurt into 1 cup of the broth. Stir the peas into the curry and simmer until they are defrosted, about 1 minute. Turn off the heat and stir the yogurt mixture into the curry. Stir in the cilantro and salt to taste. Serve in bowls over rice. Meat choices and Cooking times Chicken (see notes above) 8 min high pressure, 4 min of natural release, then quick release Beef (boneless chuck, 1” cubes) 8 minutes high pressure, then natural release Pork shoulder (1” cubes) 8 minutes high pressure, then natural release Lamb (boneless, 1” cubes) 12 minutes high pressure, then natural release If using beef, pork or lamb, trim off excess fat and cut the meat into approximately 1” cubes before cooking.. Osso Buco alla Milanese (Braised Veal Shanks, Milan-style) Serves 4 This recipe for Osso Buco is from Lorna Sass’s Cooking Under Pressure. I have made Osso Buco both as a slow braise (traditional), and made it in the pressure cooker. I actually prefer the pressure cooker version. Even if you’re only cooking for two and using just two veal shanks, don’t halve the remaining ingredients; the sauce is wonderful by itself, and any leftover sauce will make a great pasta sauce for the next day. Once you get the Osso Buco started in the cooker, cook up some pasta or rice to soak up the sauce. The gremolata garnish is traditional, but I don’t care for it; some authorities, such as Marcella Hazan, don’t use it. 4 veal shanks, about 10 oz each 2 tablespoons all purpose flour 3 tablespoons olive oil, divided 1 large onion, coarsely chopped ½ cup dry red wine or dry vermouth 1/3 cup beef or chicken stock or bullion 2 medium carrots, coarsely chopped 1 stalk celery, sliced thinly 1/2 pound mushrooms, thinly sliced One 14 oz can tomatoes, coarsely chopped, including juice 1 teaspoon dried basil 1 teaspoon dried oregano ¼ teaspoon grated nutmeg (optional) ½ teaspoon salt, or to taste (less if using canned bullion) Freshly ground black pepper to taste Gremolata: (optional) 1 tablespoon finely minced garlic 2 tablespoons grated lemon zest ½ cup finely minced fresh parsley Rinse the veal shanks, pat dry, and dredge in flour, pressing the flour into the veal with the heel of your hand. Shake off excess flour. Heat 2 tablespoons oil in the cooker. Over medium heat, brown the veal on both sides and set aside on a platter. Add the remaining oil and sauté the onions until soft, about 3 minutes. Add the red wine and stir, taking care to scrape up any browned bits that are stuck to the bottom of the pan. Add the stock, browned shanks, carrots, celery, mushrooms, tomatoes, basil, oregano, nutmeg and salt and pepper to taste. Lock the lid in place and over high heat bring to high pressure. Adjust the heat to maintain high pressure and cook for 18 minutes. Let the pressure drop naturally or use a quick-release method (venting the steam or putting the cooker in the sink and running cold water over it). Remove the lid, tilting it away from you to allow any excess steam to escape. Prepare the gremolata, if used, by combining the garlic, lemon zest, and parsley. When the shanks are done, stir in the gremolata and simmer for a few minutes. Adjust seasonings and serve. Note: if using smaller shanks, check for doneness after 15 minutes of high pressure.

Thanks everyone for all the advice. I think you might be right and not fertilizing could be the problem. Next time, I'll do an experiment as Ignatz suggested: one half with no added food, the other half fed. I'll also use a plain seed starting medium. As for why it's 75 degrees, I am growing inside my house (bathroom to be exact) for lack of anywhere better. Our house has poor insulation so the heat runs nonstop in the winter, causing the temp to get kind of high at times. The bathroom is also probably quite humid given people using the shower several times a day, bumping the temp up further. I'm amazed you all think overwatering was the issue. I know how easy it is to do that, and was really stingy with water. Yes, my pots did have drainage holes. They were plastic nursery pots, not peat. Would you say that watering once a week is too much between 1-2 months old? Also: Do you think my city water might be affecting the plants badly? One source said it was high in chlorine, which seems real bad for young plants but perhaps I'm mistaken. I'll try changing up my starting pots, too. Cells to 3.5 inch pots makes sense. Thanks again everyone.

Well I am never quick to do anything it seems. I didn't realize I had started the thread as it says " last year". Anyway after obsessing and trying to find thee one.... I am really close to pulling the trigger. I know there are a lot of very fine brands out there that offer good value, but I am just a bit too chicken to coordinate ordering this stuff remotely and having it delivered here. I have done that with furniture and its fine but I cannot fathom doing it for lvp. (that's my issue). I actually had someone come to measure and give an estimate and am having one more come in a few days so at least I will have a ballpark idea of what will be involved for real in my situation. I am 95% going with CoreTec at this point and will be getting it from a local store. Their price is decent- not stellar but decent. They have a good reputation and I just don't want to spend thousands and have the manufacturer not stand behind it. I sincerely hope I don't need the manufacture to stand behind it, but it's a concern I have. To the best of my understand, the wear layer is a key component. Some say at least 12 mil is good. I am going for 20. That's my elimination process. I started out looking for super pale and uniform in color and have kind of evolved to medium tone and varied color. It's an adventure.