You can still make a trunk chop lower down on the trunks (usually done at about 1/3 the desired finished height of the tree). As long as the trees are healthy and you have a strong vigorous root system, new growth should shoot out vigorously within a few weeks. You can then choose a branch to become the new leader and possible keep other branches as well removing what you don't want (depending on the desired shape). If you already have a few lower branches, like the one third from the right for example, you can make a chop around the second branch up (the one right before the bend) and make that the new top leader.

I don't think there is any advantage in waiting for the sake of waiting before repotting. It's one thing if you're waiting for a more opportune period in the growth cycle to repot, or if you're waiting to let the tree recover from recent stress strain, but if I were to purchase a healthy juniper today, I'd be repotting it at my earliest convenience. A pine, I would wait on until August, when most bonsai practitioners repot them in our neck of the woods. I think too, that it's not a no-no to move plants into bonsai containers, but most inexperienced growers are in too big of a hurry, moving trees to small containers when they should remain in large containers, or even in the ground to develop some caliper and in most cases, taper through a series of trunk chops. Once you move a plant into a small container, the rate of development is hampered specifically. Bonsai containers are for trees that have already been sufficiently developed & have something of a framework or basic structure, but are in need of refinement. While you can successfully use the 5:1:1 mix in deeper pots, like nursery cans, for growing material on, the material will develop faster in a soil like the gritty mix that doesn't support perched water. This is especially true of plants like pines & junipers that tolerate wet feet poorly. Everything I'm growing on as future bonsai candidates goes in the gritty mix at the first repot, and I've had excellent results with Foliage-Pro 9-3-6 supplemented with a little ProTeKt 0-0-3. How much top growth you can remove is very dependent on species, state of vitality, and timing, so there is no one size fits all answer. We aren't restricted in bonsai by the same rules that are applied to trees in the landscape, so the 10 to whatever %s we often see suggested for landscape trees are often very light. It's not at all unusual to see trees completely defoliated in June, or to have a nice fat trunk 2-3" trunk chopped back to a 2" stump in spring with nary a branch or leaf to be found. Again, what you can do or get away with depends on species, state of vitality, and timing, and a better 'feeling' of what's appropriate comes with time or the advice of an experienced practitioner. Joining a club will propel you along the learning curve far faster than you could hope to move on your own. Conifers are CAPABLE of carrying on a small degree of photosynthesis when soils are not frozen, but they don't need light. What they do need is cold. I over-winter a few plants on the bench outdoors, but most over-winter on tables in the attached garage or on the garage floor. You can also bury the pots in the ground, preferably on the north side of a building out of sun and wind. There are hundreds of potential species that will tolerate soils that are frozen solid. A copy/paste job from a previous post - forgive me if it seems to stray a little: Commonly, each species of plant has a general range of cold-hardiness. Within species and cultivar, cold-hardiness is genetically determined. That is to say that a plant that is propagated from cuttings or tissue culture will have the same ability to resist cold as the parent plant. Plants cannot "develop" a greater degree of cold-hardiness by repeated or prolonged exposure to cold, even after 100 years (trees). If we pick any plant at random, it may or may not be able to withstand freezing temperatures. The determining factor is the plants ability to prevent freezing of bound water. Bound water is the water inside of cells. There are actually three kinds of water to consider when we discuss "freezing". The water held in soil - When this water freezes, and it can freeze the soil mass solid, it doesn't necessarily kill the plant or tissues. Then there is free or unbound water, also called inter-cellular water. This is water that is found in plant tissues, but is outside of living cells cells. This water can also freeze solid and not kill the plant. The final type of water is bound water or intra-cellular water. If temperatures drop low enough to freeze this water, the cell/tissue/plant dies. This is the freeze damage that kills plants. Fortunately, nature has an antifreeze. Even though temperatures drop well below freezing, all plants don't die. In hardy plants, physiological changes occur as temperatures drop. The plant moves solutes (sugars, salts, starches) into cells and moves water out of cells to inter-cellular spaces in tissues. These solutes act as antifreeze, allowing water in cells to remain liquid to sometimes extremely low temperatures. The above is a description of super-cooling in plants. Some plants even take advantage of another process to withstand very low temps called intra-cellular dehydration. The roots of your trees can stay frozen for extended periods or go through multiple freeze/thaw cycles w/o damage, so long as the temperature does not fall below that required to freeze intra-cellular water. If roots remain frozen, but temperatures remain above killing lows, dessication is the primary concern. If the tree is able to take up water, but temperatures are too low for the tree to grow and make food, stored energy becomes the critical issue. Dormant and quiescent trees are still using energy from their reserves (like a drain on a battery). If those reserves are depleted before the tree can produce photosynthesizing mass, the organism dies. There are a number of factors that have some affect on the cold-hardiness of individual plants, some of which are length of exposure to seasonal cold, water availability (drought stressed plants are more cold tolerant), how recently planted/repotted, etc No one can give a definitive answer that even comes close to accurately assessing the temperature at which bound water will freeze that covers the whole species. Unbound water is of little concern & will usually freeze somewhere around 28*. Some material will be able to withstand little cold & roots could freeze/die at (actual) root temperatures as warm as 25-27*. Other plants may tolerate much colder actual root temperatures - as low as 10*. There's just no way of knowing unless you have a feeling for how cold-tolerant the genetic material the plant was derived from might be, and finding out is expensive (from the plant's perspective). ;o) Another example of this genetic variance is that trees found growing and fruiting well closer to the equator need no chill time, while other trees, derived of genetic stock from a more northerly provenance may need a period of chill to grow with optimum vitality in the subsequent growth period/cycle. It's wise to remember that root death isn't instantaneous at one particular temperature. Roots succumb to cold over a range of chill with cultural conditions affecting the process. The finest roots will die first, and the slightly thicker and more lignified roots will follow, with the last of the roots to succumb being the more perennial and thickest roots. Since any root death is a setback from an energy allocation perspective, and root regeneration takes valuable time, it's probably best to keep actual root temperatures in the 25-40* range as long as we can when the tree is resting, even though the organism as a whole could tolerate much lower temperatures. Even well established trees become very much like cuttings if all but the roots essential to keep the tree viable are lost to cold. Regeneration of roots is an expensive energy outlay and causes the trees to leaf out later than they normally would and shortens the natural growth period and reduces the potential increase in biomass for the next growth cycle and perhaps beyond. and We know that when trees are exposed to freezing, the finest hair roots - the ones that do the lions share of the work are the first to die. In many woody plants, these roots begin to die as soil temperatures drop below 30-32*. As temperatures drop further, larger and larger roots succumb to killing low temperatures. The point is - that many trees that SURVIVE are left with only the largest roots to support them because much of the rootage has frozen. These trees are slow to respond in the spring because they need to utilize stored energy to regenerate lost rootage before they can move sufficient water and the nutrients dissolved in water to support either growth or the flush of foliage that makes the food that allows the tree to grow (this, in the case of deciduous material). So, while trees might survive exposure to borderline killing low temperatures unprotected, we KNOW it is better for the tree, especially from an energy management perspective, if we give them protection that ensures actual root temperatures don't drop low enough to kill even the finest roots. For most temperate trees, that means we should strive to keep low root temperatures in the upper 20s at their lowest, and below 42* to keep them from growing until spring when we can get them into good light w/o worrying about frost/freeze. I think that Juniperus sargentii 'Shimpaku', aka Shimpaku juniper is the queen of junipers. You won't find it at nurseries, but it is worth ordering from mail order nurseries & putting in the ground. I have them growing everywhere (from cuttings) because it's such a beautiful plant and so forgiving - a joy to work with. That said, each of the junipers brings its own attributes and challenges to the table. J procumbens 'nana', aka Japanese garden juniper is probably the most commonly found beginner's tree, and is also pretty forgiving & malleable. Al

Sorry greenman, forgot to respond to the whole message. The moss is very fine, and as far as I know, occurred naturally and was sold with the bonsai that way. It's not sphagnum like in flower arrangements, but rather like a fine carpet of bryophyte moss. I'm pretty sure though, that the moss is dead now. Maybe it didn't like my water, and maybe the bonsai didn't either. Maybe in looking for thrips in the moss, I've killed the moss, which is sad, but not terrible. The water bowl/humidity tray thingy is part of the pot that it came in, maybe it's a decorative lake thing? I've experimented having it empty and full but you're right, it makes no discernible difference to the moss or tree. Here's an extreme closeup of the type of moss: Here is a link that might be useful:

So after writing the last post I chopped off the black branches and dabbed the ends with cinnamon to try and prevent further rotting of those branches. I kept the plant in the plastic bag for a while, then later kept just the roots in a plastic bag with pumice underneath them (to hold moisture without the roots siting in water). Eventually fungus/mold became an issue so i just put it back in it's pot with pumice and have been watering it 2 times a week (approximately). It has just been a big twig since February, I was pretty sure I was watering a dead plant. But then yesterday, by some miracle, something began to grow on it. Not very impressive to look at but I think it's going to be some leaves. Or something, I don't know, but it's alive an that's what matters. Now I just need to be careful not to kill it and I'll probably have to feed it something since it's in pure pumice. So think happy little tree thoughts for my twig and I'll let you know how it turns out!