i want to get something started in charleston

12 years ago

there are no gardening events in charleston at all; and where as im only in the area for this year. The onset of spring is immenent i think it would be awesome to get a show started and see if maybe we could have a small fee to enter and hold it at one of the plantations. this would be an awesome oppertunity to get together with other bonsai artists and discuss tecniques and enjoy the absolute beauty of the flowering of spring. please let me know what you all think. i would like to set something up for either april or may. so time is of the essence.

Comments (4)

tapla (mid-Michigan, USDA z5b-6a)
12 years ago
It doesn't sound like you have the experience to do this on your own, but your enthusiasm is a valuable asset. I think your best hope would be to get involved with a club and offer your services so it becomes a group effort. Who knows - maybe you'll find that this is your calling & you'll eventually figure out a way to make a living at it - or at least turn it into a labor of love. Wouldn't THAT be just the best thing ever?! ;-)

You could call Jeanne Thompson from the Seabrook Island Club (803)768-2192 and see what she has to say.

Al
thehodge
Original Author
12 years ago
Ive tried calling her but the number isnt valid. I find it depressing there is not one single bonsai club down here. Im even more disappointed that the owner of a store here that exclusively sells bonsai has refused to get one going. She said itd be too much of a hassle. "To what?" i ask set up a meeting schedule an place and brew some tea andhave a discussion. I just dont get it.
Related Discussions
WANTED: Wanted to get started in trading bananas
Q
Comments (4)
Hi - southlatropical - Do you have any bananas left to trade? I have a very large crinum to trade and a large clump of unknown bamboo. Also, have some variegated tropical hibiscus''snow queen'', the flowers are large -red -the foliage is pink,with white and green.Very cool tropical,would look great in your garden ! Please email me. Thank you. tina_2
...See More
wanted: closer plant trades to charleston, sc
Q
Comments (2)
Hey Darren - We miss and your wonderful plants at our swap!!! Our swaps have kinda diminished in the past few years - they are now nothing like back when you came up to Raleigh. Not that I'm complaining, I was thrilled when only 12 people showed up back when I started them nine or ten years ago. I think that there is core group of like 15 people that do most of the back and forth online chatter about the swap and most of that frenzy only started when we started having the "Special Trades" part of the swaps. Sometimes I get emails from folks wanting to exchange plants throughout the year but I only want to mess with it during the swaps. I guess it hurts their feelings but I don't have the time to be boxing up plants and standing in line at the Post Office - I get all I need from the swaps. With all the good gardening in the Charleston area you would think there would be an active trading community there! You have a right to be disappointed. I get the praise but I really don't believe that I have anything to do with the success of our swaps. It was just the right time and the right place - I got the idea from some other forum on Garden Web. So my advice would be to stick with it and hope that more gardeners in your area wake up to the fun of swaps.
...See More
Before I start...Want to get it right
Q
Comments (4)
We can answer you here, or at John's forum-- either way. You can leave the sheetrock, if you're just going to paint it. When installing the board, what kind of moisture barrier, etc should we use? Two of the walls are exterior walls. Does this go under the hardibacker? You can either use 15 pound tar paper or 6 mil polyethlene behind the CBU, or a roll on waterproofing over the top of it. Either way, you want to cut slits in the vapor barrier that's already on the exterior walls to avoid trapping moisture between the two vapor barriers. When installing the hardibacker and taping the seams, dh used modified thinset over the top of the seams, correct? That's fine, now that it's done, but it would've been easier to apply self adhesive mesh tape, and then thinset it in when spreading the thinset for the tile. That way you wouldn't end up with the "speedbumps" that you probably have now. Oh, when installing the hardibacker, what do you do around the tub flange? Does the hardibacker go behind the flange, in front of it, setting on the tub? What about the barrier? Set the edge of the CBU on TOP of the flange. In other words, you should see about a 5/8" gap between the top of the tubdeck and bottom of the CBU when installed. If you have a vapor barrier behind the CBU, bring it thru that gap, and cut it off flush with the face of the CBU. You can then fill that gap with stiff thinset so you don't have a weak spot behind the bottom of the tile. Once the hardibacker and barrier is done, then you tile as usual, correct? Yup. We will not have any niches but do have a couple of premade corner shower shelve inserts. Any tips on installing them? When installing them, the easiest way to do it is to set them on top of the edge of a full course of tile, and then cut in the next row to it. Even though you've spread the thinset on the wall, you still want to "gob" a little on the back of the shelf and push it in, making sure you've got a real good bond. Under normal circumstances, the edge of the tile should be MORE than enough to hold the shelf up. But God forbid anyone using the shower slips and grabs the shelf to keep from falling, you want that thing to be rock solid. This'll do that for you. And then clean the thinset out of the joints afterward.
...See More
I'm tired of hunting & gathering! I want to START something!!!
Q
Comments (29)
Ya know, for some dumb reason mosaics scared me a bit, too. I jumped right into leaded stained glass (took a class), then taught myself foiled stained glass, then looked at the scrap pile from those two and said "Self - you are a tightwad and you CANNOT throw those glass scraps away - find something pretty to do with them". So, I started reading on the internet ... and reading library books... and reading message boards ... and still hadn't done anything. Finally one day I just said "screw it" and jumped right in. Frankly, my creations still look like I said "screw it" ~ lol ~ but it's the most fun I've had in a while! Just jump in an have fun hon and if your stuff falls apart, salvage what you can and start all over again with your new lessons firmly stuck in your brain. You'll get nothing but support and cyber hugs from the crew on these boards. It's the nicest learning place I've found on the internet in a l-o-n-g time.
...See More
thehodge
Original Author
12 years ago
Ive tried calling her but the number isnt valid. I find it depressing there is not one single bonsai club down here. Im even more disappointed that the owner of a store here that exclusively sells bonsai has refused to get one going. She said itd be too much of a hassle. "To what?" i ask set up a meeting schedule an place and brew some tea andhave a discussion. I just dont get it.
tapla (mid-Michigan, USDA z5b-6a)
12 years ago
Usually, if you can find an experienced artist or two - and I don't mean a traveling presenter that does workshops & demos, just a couple of practitioners proficient in the art, you can get something going.

You could start by contacting a few folks and baiting them by saying, "If I can find us a place willing to let us have a monthly gathering, would you guys help support the endeavor by attending the meeting and helping me get the word out?" It's not easy. I'm a past president of a club that was around fore more than 30 years, but went under in Jan due to lack of commitment. We had SEVERAL thousand dollars in the treasury we donated to the MI Nurserymen's Assn so they could offer it as a scholarship.

A club is definitely very helpful, but it's not absolutely necessary to the future of budding artists. What IS essential, is a thorough understanding of soils and a good working knowledge of woody plant physiology. If you don't put some effort into increasing your knowledge in those areas, it's likely that your enthusiasm will before long give way to frustration. You can place whatever value on what I said that suits you, but I've seen a lot of people come to bonsai, enamoured of the pretty little trees, and as many give up because they couldn't keep their plants alive or healthy. That's a priority ..... or should be, IMO.

Best luck to you. I really do admire your enthusiasm! I love to see that in plant people and always gravitate toward that trait.

Al

i want to get something started in charleston

Comments (4)

tapla (mid-Michigan, USDA z5b-6a)

thehodge
Original Author

Related Discussions

thehodge
Original Author

tapla (mid-Michigan, USDA z5b-6a)

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

i want to get something started in charleston

Comments (4)

tapla (mid-Michigan, USDA z5b-6a)

thehodgeOriginal Author

Related Discussions

thehodgeOriginal Author

tapla (mid-Michigan, USDA z5b-6a)

COMPANY

BUSINESS SERVICES

GET HELP

CONNECT WITH US

thehodge
Original Author

thehodge
Original Author