Wren's photo

Recent Activity

    24 Comments
Thank you for reporting this comment. Undo
Wren

I would leave the stone and paint the wood to gain contrast

1 Like Save    
Thank you for reporting this comment. Undo
worthyvess

Yes but I loved your idea, Beverly, for a monochromatic look. Contrasting color would make it choppier than it already is, your rendition looked soothing.

1 Like Save    
Thank you for reporting this comment. Undo
Kat M

Ah Beverly, we had high hopes they would show us what they did. 😂

Save    
Wren started a discussion: Kitchen / Bath faucets on Ocean
    3 Comments
Thank you for reporting this comment. Undo
PRO
Diana Bier Interiors, LLC

Polished chrome is best--it will last forever and not change at all. No rusting, mottling, pitting.

My favorite bath faucets are from Kohler, Sigma, and California faucets. Great style and quality.

Def stainless steel for kitchens--one handle with pulldown sprayer. Moen, Delta, Kohler, Rohl.

Save    
Thank you for reporting this comment. Undo
PRO
Arden Hills Estates

I just did a coastal kitchen replacement and used one with motion on/off and the actual protective finish is the important thing in my mind. Used a Krauss

Save    
Wren likes 3 comments on a discussion: GAS OR ELECTRIC DRYER
    25 Comments
Thank you for reporting this comment. Undo
luna123456

That really depends. what are your priorities? Gas will be faster to dry and may be cheaper to run, but it requires a vent/gas connection/electricity/runs hotter.


Electric has three options:

- Electric resistance

- Condensor

- Heat Pump


Electric Resistance will require a 240v connection/vent/may run hotter/shorter cycles/energy hog/Cheapest 1st cost.


Condensor will require 240v connection/no vent/runs hotter/longest run time/less energy than resistance/usually only found in compact size. Have to empty condenstate tank or plumb into drain to dispose of condensate/middle of the pack first cost.


Heat Pump usually runs on 120V/Runs Cooler than all other options/Gentlest on clothes/No Vent/Have to empty condenstate tank or plumb to drain/most energy efficient/middle length cycles (longer than gas or electric resistance, shorter than condensor)/usually found in compact units/Most expensive first cost.


That is a very high level overview.


The indistry is moving towards all haat pumps for pure electric options. It is the most energy efficient and the technology is maturing. It will always be the more expensive option due to the amoint of components needed to build a unit.


Gas is only present to a large degree in North America due to it being inexpensive. The rest of the world relies on electricty and that utility is generally much more expensive than North America. That is driving the industry towards heat pump only.


Our family has been using heat pump dryers for five years now in Wisconsin (Miele). I have calculated that if the dryer lasts for its full rated life (10k hours) the savings in energy costs over electric resistance will complely pay for the entire cost of the dryer. If I was using gas it would take longer. I did not want a gas dryer due to the fire risk.


1 Like Save    
Thank you for reporting this comment. Undo
Paul F.

I went to great lengths to accomodate a stackable washer into an alcove off my hallway. It was a lot of work to get ventilation, 110 and 220W in there with a gas line. I even had a stainless vent made for under an eve in a highly visible area! Right as I was about to buy the LG washtower the GE ULTRAFAST ventless electric all-in-one came out that washes and dries in under 2 hours. The reviews were so great that I capped everything and installed one. It has more capacity than a normal washer and the heat pump technology allows it to use just the 110 plug, the water and a drain. The machine uses 850w instead of the up to 5000w a normal dryer uses. My calculations show I pay about 25 cents a load. No excess heat, no laundromat smell, no humidity... its great. Look into it.

1 Like Save    
Thank you for reporting this comment. Undo
Jennifer Hogan

I had gas in my last home and electric in this home. I have not found that one performs better than the other, both dry clothing just fine. Last home was in San Diego new home in Pennsylvania. Utility costs are basically half so even with having and electric stove and dryer and running the heat and air conditioning my bills are far less than they were in CA.




1 Like Save    
Wren started a discussion: washing machine - all in one
    1 Comment
Thank you for reporting this comment. Undo
georgect

If you have the room to stack then that's preferred.

The bigger the dryer drum the better. Clothes need to tumble freely and dry more efficiently and faster.

The all in ones need to be cleaned and cared for more than your standard dryers.

Any heat pump dryer, need special maintenance.

Save    
Wren started a discussion: quality shower and bath faucets
    7 Comments
Thank you for reporting this comment. Undo
k8cd

Every plumber I’ve talked to says go with Delta. We did and have had no issues (but it’s only been a few month since we moved in.)
Brizo is owned by Delta, so another vote for Brizo!

Save    
Thank you for reporting this comment. Undo
wdccruise

Brizo is the Delta fancy-pants brand. The Brizo T60P220-PC is $450 while the similar Delta T14259 is $150. Both have lifetime warranties. The Brizo R60000-UNBX rough-in valve is $65 while the identical Delta R10000-UNBX rough-in is $41.

Save